RTREQ=OK, DLACT=INACTIVE, RTACT=NO, WRPPL=PROTECTED, CARDSS=NO, CMDINHD=CAN, CMDINHC=CAN, BUFWREN=DISABLE, BUFRDEN=DISABLE, WTACT=NO, CARDINS=NO, CARDDPL=NO
Present State
| CMDINHC | Command Inhibit (CMD) 0 (CAN): Can issue command using only CMD line 1 (CANNOT): Cannot issue command |
| CMDINHD | Command Inhibit (DAT) 0 (CAN): Can issue command which uses the DAT line 1 (CANNOT): Cannot issue command which uses the DAT line |
| DLACT | DAT Line Active 0 (INACTIVE): DAT Line Inactive 1 (ACTIVE): DAT Line Active |
| RTREQ | Re-Tuning Request 0 (OK): Fixed or well-tuned sampling clock 1 (REQUIRED): Sampling clock needs re-tuning |
| WTACT | Write Transfer Active 0 (NO): No valid data 1 (YES): Transferring data |
| RTACT | Read Transfer Active 0 (NO): No valid data 1 (YES): Transferring data |
| BUFWREN | Buffer Write Enable 0 (DISABLE): Write disable 1 (ENABLE): Write enable |
| BUFRDEN | Buffer Read Enable 0 (DISABLE): Read disable 1 (ENABLE): Read enable |
| CARDINS | Card Inserted 0 (NO): Reset or Debouncing or No Card 1 (YES): Card inserted |
| CARDSS | Card State Stable 0 (NO): Reset or Debouncing 1 (YES): No Card or Insered |
| CARDDPL | Card Detect Pin Level 0 (NO): No card present (SDCD#=1) 1 (YES): Card present (SDCD#=0) |
| WRPPL | Write Protect Pin Level 0 (PROTECTED): Write protected (SDWP#=0) 1 (ENABLED): Write enabled (SDWP#=1) |
| DATLL | DAT[3:0] Line Level |
| CMDLL | CMD Line Level |